• +86 18676339818
Contact Info

Phone: +86 18676339818

QQ: 1833367119

Address: Bofa Lighting Company, Xinnan, Qishi, Donguan, China. 523460

The development of latest OLED’s & enhancement of major components of LED’s has led to the expansion of development & utilization of LED’s. Listed below are some of the aspects of modern LED’s

  • Luminous Walls & Ceilings
  • Transparent Walls
  • Partitions with capabilities to turn opaque depending on the environment.
  • Fabrics that are powered by solar energy
  • Vintage Style Edison Bulbs
  • Luminous Garments

They are quite slim & even. They have a unique 2-dimensional luminous surface which is soft & smooth. Flexible O-LED’s are also available in Market. If not in use they may seem to be transparent, mirrored or diffused.

O-LED stands for Organic Light Emitting Diodes. Similar to a LED they do contain 2 different electrodes but are based on films extracted from carbon. These films are placed in between both electrodes where one is metallic known as the cathode & other one is transparent known as an anode. Most commonly transparent one is actually a glass.

The answer is No. LED generally operates through utilizing a 1 step process known as electroluminescence which does not depend on time to reach its maximum capacity. Other light sources such as fluorescents or HID operate through a discharging mechanism which requires the main core to be heated thus they can require a few minutes to reach their full potential.

A LED (light emitting Diode) is a common resource for light that comprises of 2 lead semiconductors. Generally, it is known as a p-n junction diode, which provides light upon activation. LED upon providing the required voltage promotes electrons to recombine with electron holes present within the bulb which results in the release of energy known as photons.

Generally, LED comprises a single chip which serves the basic need of emitting light once connected to a power source. Chip on another hand comprises a single thin wire which serves as a cathode in between chip & lead electrical contact. For the cooling purpose, it contains a thermal heat sink on top & ceramic base. Most important component of a chip is its lens which not only serves the purpose of protection but also ensures modulation of the light beam at a preferred angle. Lenses come in wide variety of natures. Obtaining white light requires the chip to be coated with phosphors

LED (Light emitting diodes) works on the basic phenomenon of moving electronics between two unlike terminals that are cathode and anode. The flow of electrons between these two positive and negative terminals occurs due to the phenomenon of electroluminescence. When the current start to flow it makes the electrons moves towards the N and P-type junctions of a semiconductor. As the kinetic energy of electron rises to the maximum level, the electrons at the p-n junctions excites and jumps off and eventually electron loses its extra energy. This loss of energy causes ordinary diodes to heat and release extra energy. Although this loss of extra energy in LED technology takes place in the form of photons and when a packet of photon release it emit lights in the form of energy  of different colors .

LED operates by converting electrical energy into light energy by means of direct conversion method whereas the incandescent source of light operates through traditional means by burning a filament until it turns red hot. Similarly, compact fluorescent lamps comprise of UV discharging mechanism alongside phosphor to provide light. HID lamps on other hand operate through a mixture of different gasses kept within a discharge tube ultimately resulting in the production of photons.

Check out DGBFLighting Amazing Types of LED Light Bulbs

Vintage Edison Led Bulb | Vintage Led Edison Bulb | Vintage LED Bulbs | Vintage Led Light Bulb | Vintage Soft Led Filament Bulbs